Glass glue is a commonly used adhesive used in kitchen and bathroom decoration, as well as on glass doors and windows.
Due to the humid environment in these places, the glass glue is very prone to mold and blackening, which not only affects the appearance but also breeds bacteria, endangering the health of family members. How to deal with the yellowing and moldy problem of glass glue without affecting its effectiveness has become the top priority.
So, what should be done if the glass glue becomes moldy and black? Next, I will share with you how to solve this problem.
1、 Cleaning and wiping
As is well known, 84 disinfectant has a certain bleaching effect. We can mix water and 84 disinfectant in a ratio of approximately 3:1, and then use a damp cloth dipped in a small amount of mixed water to wipe. If the stains are stubborn, you can also use a steel wire ball and brush to improve the cleaning effect.
In addition, white vinegar has a good bactericidal effect and does not irritate mucous membranes, skin, or respiratory tract. Therefore, if the area of mold is small, we can use white vinegar and a toothbrush for cleaning.
2、 Replace the glass adhesive
If the mold on the glass glue is severe, we need to remove the original glass glue and then reprocess it. This process is not as difficult as imagined.
Simply put, here are the following steps:
1. Prepare four types of tools: knife, glass glue, glue gun, and decorative paper
2. Use a knife to remove the previous glass glue.
3. Stick decorative paper on the edges to prevent the glass glue from spilling to other areas.
4. Use a glue gun to apply a circle of glue along the seam, and use a scraper to smooth the surface.
5. Tear off the textured paper and wait for 12 hours until the glass adhesive dries completely.